By McKenzieDriftBoat.com
General Forum (936)
| Discussions | Replies | Latest Activity |
|---|---|---|
 Guy's Wooden Drift Boat ProjectHello Everyone, My name is Guy and this is my first post in this forum. I am here because I want to build a wooden drift boat and, undou… Started by Guy Fredrickson |
63 |
4 hours ago Reply by Guy Fredrickson |
 update sitka spruce oarsHello all. Had some time over the weekend and started building my Culler style oars. While the original design calls for hollowing out the… Started by ray magnan |
6 |
16 hours ago Reply by Rick Newman |
First trip out of the garageStill much work to do.......lots of advice from this site went into this. Started by stephen ludwig |
8 |
on Tuesday Reply by stephen ludwig |
Update on my buildHello all, I started putting pieces together today, and I'll be damned, but it is starting to look like a boat. Started by Greg Jensen |
8 |
on Tuesday Reply by Rick Newman |
EPOXY vs POLY RESIN TEST RESULTSHello all - just finished a couple of tests last night and thought I would share the results.I used 2 pcs of 2' x 4' of 1/4" plywood.On 1 p… Started by Greg Jensen |
3 |
on Saturday Reply by Greg Jensen |
 Ten Treacherous Rivers...As most of you know, I'm a wood drift boat "junkie". I row my boat with passion and occasionally pay the price. Recently, I was asked to… Started by Greg Hatten |
19 |
on Saturday Reply by Greg Hatten |
Driftboat TrailerFinishing a 16 footer with 52" wide bottom. Thinking of buying a 5X8 Utility trailer (Northern Tool) and modifying. Anybody do this and if… Started by stephen ludwig |
8 |
on Friday Reply by Christopher M. Gosselin |
 dory design software?Hoping that someone on here has found a solution for my quandary... I've been working on combining lines from a Mckenzie double-ender and… Started by Ben A. Hayes |
6 |
Feb 17 Reply by Jason Knight |
 McKenzie Wooden Boat FestivalIt's great to see the McKenzie Wooden Boat Festival posted in this most recent issue of WoodenBoat Magazine, page 103, including the parade… Started by Roger Fletcher |
2 |
Feb 17 Reply by Rick Newman |
 Skid Plate QuestionsHey, I've finally gotten back to my bottom replacement project (Tatman, 16'). The new bottom is on (actually took it for a spin, last week… Started by Jack Rose |
20 |
Feb 16 Reply by Randy Dersham |
© 2012 Created by Randy Dersham.
