"Cool thanks for the tips ! Matt"
Wooden Boat People
By McKenzieDriftBoat.com
M Quinlan's Discussions
Epoxy
3 Replies
Hi , I found this epoxy close by, would this be exceptable to use for my scarf joints? I searched around didn't see how much to use . Do you just paint on the epoxy to one side of the scarf and…Continue
Started this discussion. Last reply by Randy Dersham Feb 27, 2010.
Cutting Techniques
6 Replies
Hi ,Last week I received my signed copy of Roger Fletcher's awesome literary masterpiece. I noticed an illustration of cutting the side panels with a capenters saw. I am wondering if this the…Continue
Started this discussion. Last reply by M Quinlan Feb 20, 2010.
Salt Water and Oiled Boats
12 Replies
Hi, I was wondering if an oiled boat can be used in saltwater? A couple of times a year I head down and fish the Jacksonville, FLA area coastal waters. Thanks ,MattContinue
Started this discussion. Last reply by Lawrence E. Long Feb 17, 2010.
Rapid Robert 16 footer horse power
11 Replies
Hi , I currently have plans I bought from River's Touch for a 14 rapid robert , before the 16 foot came out (long ago) never built !! I am Wondering what are the major dfferences are in the two ?…Continue
Started this discussion. Last reply by AJ DeRosa Feb 3, 2010.
M Quinlan's Page
Latest Activity
lhedrick replied to M Quinlan's discussion Epoxy
"Most epoxy will do the job but, since I know nothing about the brand you are using do test first. The brake it apart to see how it worked. The glue joint should be stronger then the wood.
As for the process. Get the shop up to temperature. Mix the…"
M Quinlan posted a discussion
Epoxy
Hi , I found this epoxy close by, would this be exceptable to use for my scarf joints? I searched around didn't see how much to use . Do you just paint on the epoxy to one side of the scarf and join the two pieces? Then for the 56 inch bottom panel I need , do you scarf joint the whole 15'9" lenth of the bottom panel ? Or what about this product (WEST SYSTEM Six10™ Thickened Epoxy Adhesive) Thanks ,Matt Loctite info : 2 x 8 Fl. Oz. Professional Job Size Epoxy, Loctite This epoxy is a…See More
M Quinlan replied to M Quinlan's discussion Cutting Techniques
"Thanks everyone for your guidence. True , nice looking router jig and shop,M. Baker ! I have never used a router, may have to go the jack plane route. I have some old ones , from my great grandfather. Not sure if they will work though. Q"
Lawrence E. Long replied to M Quinlan's discussion Cutting Techniques
"Matt:
Circular saw is fine for cutting panels- blade just cutting through PW.- Also used to cut the bottom panel curves. Side panels clamped together and trued up with a jack plane- they will be perfectr matches.
Bakers router jig looks good- but a…"
Brad Dimock replied to M Quinlan's discussion Cutting Techniques
"Sam Manning drew the illustrations that show the old hand tools. He's a wonderful man and a fabulous illustrator, but a bit of a luddite regarding power tools. As the other folks say, a power saw is fine, with a good plywood blade.
1) since…"
larry Hambley replied to M Quinlan's discussion Cutting Techniques
"Mat,
A circle saw is the best way to go for cutting sides. I had good luck with a battery powered 5" saw with a fine blade. The saw is light and no cord to hang up. Set blade depth to just clear the wood. You will be surprised at how easy it…"
Mike Baker replied to M Quinlan's discussion Cutting Techniques
"O.K. here are a couple of shots of the scarfing jig.
Mike
http://www.bakerwooddriftboats.com
"
Mike Baker replied to M Quinlan's discussion Cutting Techniques
"Hey Matt,
I use a circular saw for cutting my sides. I use one of those cheap blades made for plywood and O.S.B. I just get a new one about every other boat. I use a guide made from 3/8 x 6" x 8' O.S.B. I also made a zero clearance base…"
M Quinlan posted a discussion
Cutting Techniques
Hi ,Last week I received my signed copy of Roger Fletcher's awesome literary masterpiece. I noticed an illustration of cutting the side panels with a capenters saw. I am wondering if this the preferred method in cutting the sides ? Seems it would be tough to keep my lines straight. Had a couple of additional questions, I am going to build "The Bridges" drift boat : 1. I am thinking of using a table saw to cut the bevels for my frames. (best method?) Any insight is appreciated, tried to…See More
Lawrence E. Long replied to M Quinlan's discussion Salt Water and Oiled Boats
"A true becket is spliced- or rather relaid. Take a section of 3 strand line about 4 times longer than the wanted diameter of the "ring". Unlay the line to get a single strand. Make a loop about 1/3 of the lenght of the strand and re-lay…"
Brad Dimock replied to M Quinlan's discussion Salt Water and Oiled Boats
"Is a true becket spliced in? This one is knotted, but the bowline is spliced. We can fix that.
We started work on her on a Monday morning last August, and launched her twelve days later. I only got to row her for about ten minutes before I flew…"
Lawrence E. Long replied to M Quinlan's discussion Salt Water and Oiled Boats
"Brad: absolutly a classic piece of craftsmanship! Now then, I have to ask- is the becket at the transom a true becket or did you cheat and tie knots? I can't see the otherside of the transom.
Randy/Dave have the red oak thing right on. The…"
Brad Dimock replied to M Quinlan's discussion Salt Water and Oiled Boats
"Damn! The guy in charge of getting the wood fumbled the ball--he was supposed to get WHite Oak and got Red. I guess we'll have to replace it some day."
M Quinlan replied to larry Hambley's discussion Rapid Robert Floor Issue
"Makes sense , thanks again! Gotta love a boat with weathered character. Matt"
Profile Information
- Hometown:
- Cleveland
- About Me:
- now live in Atlanta Georgia
- Boats I own:
- Rapid Robert
Comment Wall
- No comments yet!
© 2013 Created by Randy Dersham.
