Wooden Boat People

By McKenzieDriftBoat.com

Stephen Blalock
  • Male
  • Cottonwood, CA
  • United States
Share on Facebook Share Twitter

Stephen Blalock's Discussions

McKenzie River information
6 Replies

I have a desire to drift the Mckenzie river.  It has been over 30 years and would like to find some information books, maps, and or internet info.  Thank you.

Started this discussion. Last reply by Rick Newman May 16, 2011.

chine batten repair
1 Reply

I discovered some rot in a white oak chine batten and the photos show the result. I have built a Ray's kit which had all the scarfing done so this is my first scarf. I could not find any white oak…Continue

Started this discussion. Last reply by Jack Billings Apr 26, 2011.

Oil chine batten?
1 Reply

Oil chine batten?If not, why not?I was thinking about oiling chine batten as it is will get scratched/gouged.Continue

Started this discussion. Last reply by Dave Z Apr 12, 2011.

6 oz vs 4 oz fiberglass cloth
4 Replies

Any thoughts on 6 ounce vs 4 ounce cloth for the sides of a drift boat refinish???  Anyone use Aeromarine epoxy? Recomendation for epoxy vendors near California to save shiping time.  Thank you all…Continue

Started this discussion. Last reply by Stephen Blalock Apr 2, 2011.

 

Stephen Blalock's Page

Latest Activity

Stephen Blalock replied to Seamus Walsh's discussion new boat pics
"Great looking boat!   wow, framed boat with a curved stem. how'd you do that?"
Aug 3, 2011
Stephen Blalock commented on Eric Krause's photo
Thumbnail

Boat Kayak Finished 5!

"Beautiful get them wet!"
Jun 21, 2011
Stephen Blalock replied to Terry Jones's discussion Stich and Glue
"Beautiful Boat! "
Jun 7, 2011
Rick Newman replied to Stephen Blalock's discussion McKenzie River information
"Greg, I've heard things about guys that live in van's down by the river. Will the daughters of Eugene be safe? Ha-ha   Rick Newman"
May 16, 2011
Greg Hatten replied to Stephen Blalock's discussion McKenzie River information
"Ha, Robb... I don't live in my boat - "I live in a van down by the river..." I just spend a lot of time in my boat on the McKenzie.  Ha ha!!  Stephen - I'd be happy to help "reaquaint" you to the river... it…"
May 15, 2011
Robb Grubb replied to Stephen Blalock's discussion McKenzie River information
"Stephen, - The best resources are obviously locals who float regularly. Between WBP, McKenzie River Guides Association and local private folks (I think Greg Hatten lives in his boat) you can find all you need. It also depends on if you are going to…"
May 15, 2011
Stephen Blalock replied to Stephen Blalock's discussion McKenzie River information
"It is a big help, I have been working on my boat and reading wood boat stuff on the web and want to get out of my rut, and see some new water.  I want to work up to some harder stuff as the Sacramento river is great fishing but prettty easy…"
May 14, 2011
mitchell replied to Stephen Blalock's discussion McKenzie River information
"Stephen,   I've only done two different runs on the McKenzie. I'll give you a heads up on the runs I've done and hopefully the other more rounded McKenzie drifters will chine in.   The run from Hayden Bridge to the take out…"
May 14, 2011
Stephen Blalock replied to Don Hanson's discussion Galvanized Rope ring?
May 3, 2011
Stephen Blalock replied to Dan Burr's discussion Rear Knee Brace
"More detail please.  I use gunnel to gunnel arch, and would like the abiliy to walk around."
Apr 27, 2011
Jack Billings replied to Stephen Blalock's discussion chine batten repair
"Stephen, One of the battens on my 1978 Keith Steele boat had gone south.  I have some white oak from our property and was able to cut two 8' strips 1 1/2 X 1/2.  I beveled them first, then scarfed them on my chop saw.  I made a…"
Apr 26, 2011
Stephen Blalock replied to Dan Burr's discussion Spruce Oars
"I like barkley sound oars also!  I have used them for years!  I am refinishing them now and will post pictures when done.  I may try BLO turpentine and varnish mix. "
Apr 25, 2011
Stephen Blalock replied to PATRICK M CLEAREY's discussion Bo's under floor board anchor system
"Drill a hole through the seat, I epoxyed the back of the seat because over time the water from anchor rope damaged the surface lamenation."
Apr 23, 2011
Stephen Blalock replied to PATRICK M CLEAREY's discussion Bo's under floor board anchor system
"I have used "Bo's anchor system" for years. I like it I use the flexable pvc and feel a sharp knife could cut right through it in an emergency.  Do remember to knot the end of your anchor rope or you will eventually leave an…"
Apr 23, 2011
Stephen Blalock commented on John MacGillivray's album
Thumbnail

Steele Drift Boat Restoration Project

"Looking good! Keep the pictures coming it is fun to see you restoration"
Apr 20, 2011
Dave Z replied to Stephen Blalock's discussion Oil chine batten?
"oil the hell out of it.  the only thing varnished on my boats are seat tops and exterior side panels.  rails, battens, interiors are all oiled. go for it.  "
Apr 12, 2011

Profile Information

About Me:
I like wooden driftboats! Fly fishing, River Time!!!!
Boats I own:
Ray's 17' SPECIAL ROGUE kit boat built in 1997

Comment Wall

You need to be a member of Wooden Boat People to add comments!

Join Wooden Boat People

  • No comments yet!
 
 
 

© 2012   Created by Randy Dersham.

Badges  |  Report an Issue  |  Terms of Service